Showing posts with label or. Show all posts
Showing posts with label or. Show all posts

Tuesday, August 30, 2016

2010 Ford Flex Power Liftgate Wont Open or Close SYNC Stops Working

2010 Ford Flex Power Liftgate Wont Open or Close SYNC Stops Working


If you have the following symptoms with the power liftgate:
  • With liftgate closed, try to open it with the liftgate buttons or the keyfob.  The gate will open about six inches, and then give up, slamming shut.
  • When open (manually), the gate will refuse to close from any of the liftgate buttons or the keyfob.
  • When closed (manually), the gate will refuse to latch completely.  (You will not hear the latching sound you normally hear when the gate is closed).
  • Driver information center indicates that liftgate is open when it is in fact closed.
  • Interior lamps stay on when all doors are closed because it thinks the rear liftgate is open.  (The lamps will shut off after driving away.)
    • Workaround:  Rotate the instrument cluster dimmer to the lowest position, until it clicks -- this will force all of the interior lamps off.  This is also useful if youre tailgating and you dont want the interior lamps on.
It seems that its possible that the liftgate can forget the learned open and closed points.  It even mentions this in the manual.  See this post on the Ford Flex forum.

At the same time this issue happened, the voice command button on the steering wheel (the button for SYNC) stopped responding.  My phone would not detect the SYNC Bluetooth connection and for all practical purposes it seemed that SYNC was not working at all. 

The solution to both problems:
  • Close the liftgate manually.  
  • Disconnect the battery for 20 seconds.  
  • Reconnect the battery.  
  • Make sure the power liftgate is enabled in the vehicle setup.  
  • Start the vehicle.
  • Open the liftgate with the keyfob or any of the liftgate buttons.
  • Wait at least one minute for SYNC to boot up, and see if the voice command button starts working again.




I may have gotten lucky, but this solved both the SYNC issue and the liftgate issue in my vehicle.


Get

Read more »

Monday, August 29, 2016

Adobe Photoshop CC 2015 16 1 x86 x64 Final Terbaru Full Version With Patch or Crack

Adobe Photoshop CC 2015 16 1 x86 x64 Final Terbaru Full Version With Patch or Crack


Adobe Photoshop CC 2015 16.1 (x86-x64) Final Terbaru Full Version With Patch
Setelah beberapa bulan lalu Product Adobe yang berlabel CC atau Creative Cloud bertengger di versi 2014. kini Akhirnya seluruh Product Adobe kembali merillis versi barunya, pertama ini yakni Adobe Photoshop CC 2015 16.1 (x86-x64) Final Terbaru Full Version With Patch.

Seperti yang sudah kita ketahui, Adobe Photoshop memiliki segudang rahasia design, buat sobat-sobat yang memiliki bakat terpendam akan Inspiriasi dan imajinasi, ketika telah menguasai photoshop akan dapat dengan mudah menghasilkan karya-karya luar biasa untuk olah digital picture.

Adobe Photoshop sudah di kenal di seluruh penjuru dunia akan kemampuan tools-tools olah digitalnya yang luar biasa.

Memiliki Product paling update dengan Spesifikasi hardware yang memumpuni, tentu sangat di sarankan, guna meningkatkan pengalaman pengguna ke fungsi yang jauh sangat lebih baik dari versi sebelumnya, dimana ini merupakan versi latest version nya atau versi paling mutakhir saat ini.

System Requirement:
  1. Intel® Pentium® 4 or AMD Athlon® 64 processor (2 GHz or faster)
  2. Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
  3. 2 GB of RAM (8 GB recommended)
#Apa yang baru dari Adobe Photoshop CC 2015 16.1 ini

Langkah Install dan Aktivasi:
  1. Putuskan Koneksi Internet
  2. Extract "Adobe Photoshop CC 2015 x64.ISO" atau "Adobe Photoshop CC 2015 x86.ISO" (sesuaikan dengan versi OS sobat)
    Note : Jangan di mount supaya tidak muncul error "Please insert the Disk" nantinya....!!!
  3. Lalu klik kanan pada "Set-up.exe" yang ada di folder nomor 1 dan pilih "Run as Administrator" lalu pilih "OK"
  4. Jika muncul PopUp silahkan pilih "Ignore"
  5. Silahkan pilih ” Try “, lalu pilih ” Sign in ” (Pastikan Koneksi Off )
  6. Maka akan muncul, ” Sign in Later “, silahkan di Klik
  7. Ikuti Terus Installasi sampai selesai
  8. Sabar dulu jangan dulu dibuka aplikasi Photoshop CC 2015 nya
  9. Sekarang update dulu dengan cara buka folder nomor 2 dan klik kanan pada "AdobePatchInstaller.exe" lalu pilih "Run as Administrator" lalu "OK" dan ikuti terus sampai selesai
  10. Masih harus sabar dulu jangan dulu dibuka aplikasi Photoshop CC 2015 nya
  11. Sekarang buka folder nomor 3 atau 4 untuk melakukan aktivasi agar full version. Saran ane biar gak ribet pakai folder nomor 3 yakni menggunakan "Uneversal Adobe Patcher"
  12. Jalankan "adobe.snr.patch-painter.exe" dengan cara klik kanan dan pilih "Run as Administrator" lalu pilih "OK"
  13. Pada Kolom Patch silahkan pilih produk Adobe yang akan diaktivasi. Contoh disini saya akan mengaktivasi "Adobe Photoshop CC 2015 (64-Bit)"

    Adobe Photoshop CC 2015 16.1 (x86-x64) Final Terbaru Full Version With Patch
  14. Lalu Klik Tombol "Patch" yang ada di pojok kanan bawah.
  15. Sekarang Produk Adobenya sudah Full Version.
  16. Untuk menghindari Blacklist serial, silahkan Berikan Firewall , Wajibb !! Berikut IP Hosts nya:

    127.0.0.1 lmlicenses.wip4.adobe.com
    127.0.0.1 lm.licenses.adobe.com
    127.0.0.1 na1r.services.adobe.com
    127.0.0.1 hlrcv.stage.adobe.com
    127.0.0.1 practivate.adobe.com
    127.0.0.1 activate.adobe.com
  17. Selesai
Screenshot:
Adobe Photoshop CC 2015 16.1 (x86-x64) Final Terbaru Full Version With Patch


Link Download:
  • Download Adobe Photoshop CC 2015 16.1 x86 - (1 GB)
  • Download Adobe Photoshop CC 2015 16.1 x64 - (1.2 GB)  
  • Password if need :  | Tested on Windows 10 Home Single Language 64 Bit

Terimakasih atas Kunjungannya
Semoga Bermanfaat ^_^

Get

Read more »

Sunday, August 28, 2016

Search Mint com Transactions by Date with Firefox or Chrome

Search Mint com Transactions by Date with Firefox or Chrome


 If youre a Mint.com user, youve probably noticed that the search interface isnt all that great.  For one thing, you cant search your transactions by date.  When tax season rolls around, it is absolutely necessary to search and display only the transactions from the previous year.

It seems Im not the only one to have noticed this oversight.  Look at the discussion on the Mint.com help blog here.  At that time (2009!) Mint representative Matt Snider posted the following response:

Matt Snider over 4 years ago


You can, but currently only by modifying the URL directly. We intend to someday expose this functionality in the user interface, but have not been able to agree on a minty enough design. Anyway, go to the transaction page, and you should see "https://wwws.mint.com/transaction.event" in the URL. Add the following "?startDate=06/01/2009&endDate=06/30/2009" at the end of the URL and hit enter. Change the start and end date to the dates you want to search. The complete URL should look something like this:

https://wwws.mint.com/transaction.eve...

Here Mint admits that theyve been unable to come up with a "Minty enough" design in four years time!  In addition, this post reveals a semi-official interface to do this filtering yourself.  With this information, at least we are somewhat equipped to fix this problem ourselves.
  • If you use the Chrome browser, check out this extension in the Chrome Web Store.  Im not a Chrome user so I cant comment more on this solution but it looks pretty sweet.
  • If you use Firefox, you can use my Greasemonkey script.
The basic interface.  Both dates are OK, so theyre colored mint green.
Prerequisites:
  • Firefox
  • Greasemonkey Add-On
  • Mint Date Range script
Using the script:
  • Load the "Transactions" view on Mint.com.
  • Two input fields will appear below the search box. 
  • Set the start date and end date.  
  • If both dates are valid dates the page should reload automatically click the "Go" button.
  • If either of the dates are invalid the invalid date will be marked as pink.
  • You can get pretty crazy with the input date.  Try "Jan 1 2013" or "12-Jan-13" or whatever you want.  This functionality comes from the awesome datejs library.  Read more about that here.
  • It is possible that you get into a situation where the dates arent updating, in this case you may need to start from "Transactions" again.
Here are some more clips of what the interface looks like:

Hover over either date to get more information.  Note "yesterday" works fine.

...just using a different entry format.


Here is an invalid entry.

It isnt perfect, but better than nothing!  Check out the source at github, change it, and push it back to me!




Get

Read more »