Showing posts with label power. Show all posts
Showing posts with label power. Show all posts

Tuesday, August 30, 2016

2010 Ford Flex Power Liftgate Wont Open or Close SYNC Stops Working

2010 Ford Flex Power Liftgate Wont Open or Close SYNC Stops Working


If you have the following symptoms with the power liftgate:
  • With liftgate closed, try to open it with the liftgate buttons or the keyfob.  The gate will open about six inches, and then give up, slamming shut.
  • When open (manually), the gate will refuse to close from any of the liftgate buttons or the keyfob.
  • When closed (manually), the gate will refuse to latch completely.  (You will not hear the latching sound you normally hear when the gate is closed).
  • Driver information center indicates that liftgate is open when it is in fact closed.
  • Interior lamps stay on when all doors are closed because it thinks the rear liftgate is open.  (The lamps will shut off after driving away.)
    • Workaround:  Rotate the instrument cluster dimmer to the lowest position, until it clicks -- this will force all of the interior lamps off.  This is also useful if youre tailgating and you dont want the interior lamps on.
It seems that its possible that the liftgate can forget the learned open and closed points.  It even mentions this in the manual.  See this post on the Ford Flex forum.

At the same time this issue happened, the voice command button on the steering wheel (the button for SYNC) stopped responding.  My phone would not detect the SYNC Bluetooth connection and for all practical purposes it seemed that SYNC was not working at all. 

The solution to both problems:
  • Close the liftgate manually.  
  • Disconnect the battery for 20 seconds.  
  • Reconnect the battery.  
  • Make sure the power liftgate is enabled in the vehicle setup.  
  • Start the vehicle.
  • Open the liftgate with the keyfob or any of the liftgate buttons.
  • Wait at least one minute for SYNC to boot up, and see if the voice command button starts working again.




I may have gotten lucky, but this solved both the SYNC issue and the liftgate issue in my vehicle.


Get

Read more »

Monday, August 29, 2016

E Book Power Point 2007

E Book Power Point 2007


E-Book Power Point 2007
Selamat malam sobat FS, kali ini ane mau share E-Book Power Point 2007. Mungkin sobat ada yang berminat mempelajarinya silahkan di download. E-Book ini dilengkapi dengan screenshot dan step by step sehingga mudah dalam mempelajarinya apa lagi bahasa Indonesia. Saya rasa ebook ini sudah cukup lengkap karena dilihat dari halamannta mencapai yang mencapai 154.

Link Download:
  • Download E-Book Power Point 2007 - (15 MB) 
  • Password if need :  | Free Download Software Full Version

Semoga Bermanfaat ^_^

Get

Read more »

Power Simulation PSIM v 9 x86 x64 Full Version

Power Simulation PSIM v 9 x86 x64 Full Version


Power Simulation (PSIM) v.9 - x86-x64 Full Version

Power Simulation atau yang lebih dikenal dengan PSIM adalah salah satu software yang berguna untuk mensimulasikan berbagai karakteristik elektronika dan system tenaga listrik yang berjalan pada Operator System Windows dan semacamnya. PSIM yang kami berikan bersifat installer.
 
1. Tampilan Awal
Tampilan awal pada PSIM sama seperti lembaran kosong pada umumnya yang tidak berisikan sesuatu. Contoh tampilan awal PSIM seperti dibawah ini.
Power Simulation (PSIM) v.9 - x86-x64 Full Version

2. Komponen-komponen elektronika pada PSIM
Sesuai dengan fungsinya komponen-komponen yang digunakan pada PSIM yaitu komponen elektronika yang pada umumnya seperti:
     1. Transistor
     2. Kapasistor
     3. Induktor
     4. Dioda

Power Simulation (PSIM) v.9 - x86-x64 Full Version
Gambar komponen-komponen yang ada didalam PSIM:


3. Membuat Rangkaian pada PSIM 
Seperti halnya membuat sebuah rangkain kita harus mengetahui rangkaian apa yang akan kita buat dan komponen-komponen apa saja yang ada dalam rangkaian tersebut. Maka kita harus menentukan rangkaian apa yang akan kita buat dan komponen apa saja yang ada didalamnya. Kemudian kita sambungkan komponen-komponen tersebut menggunakan wire atau tanda berikut .


Berikut contoh rangkaian penyearah gelombang penuh controled 45 pada 3 phasa:

Power Simulation (PSIM) v.9 - x86-x64 Full Version
Rangkaian penyearah gelombang penuh controled 45 3phasa


4. Melakukan simulasi rangkaian 
Setelah membuat rangkaian, selanjutnya kita mensimulasikan rangkaian tersebut dalam bentuk gelombang dengan menggunakan tanda atau mengunakan tanda  

Berikut hasil simulasi dari rangkaian diatas.

Power Simulation (PSIM) v.9 - x86-x64 Full Version

Dengan PSIM kita juga bisa melatih kreativitas kita dalam membuat rangkaian sesuai dengan hati kita dan kita juga dapat mensimulasikannya dalam bentuk gelombang.


Link Download :
  • Download PSIM v.9 Full Version - (123 MB)
  • Password if need : | Tested in Windows 8.1 Single Language 64 Bit
Untuk cara install dan cara aktifasi agar full version bisa dibaca di "Readme.txt" yang terinclude di dalam link download di atas.


Terima Kasih atas Kunjungannya
Semoga Bermanfaat ^_^

Get

Read more »